Price: $189.00
(as of Oct 18, 2024 12:12:46 UTC – Details)
Product Description
The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked.
1 48kHz/24bit 2 Wire/Wireless Mode 3 Long Standby Time 4 Digital/Analog Mode
OLED Screen for Monitoring and Visual Operation
The receiver has a TFT screen and the transmitter has an OLED screen. These screens provide essential information at a glance, including battery power, audio dynamics, and signal status. With this visual display, users can easily operate the microphone and have real-time control over its performance.
The receiver supports muting and real-time monitoring. Multi-function helps users adjust according to shooting needs, avoid accidents and noises, and ensure the microphone works efficiently and stably.
Gain Control on TX and RX
10-level Gain control on Receiver and 12-level on transmitter. Supports users to adjust mic gain according to their recording needs.
The wireless working range is up to 100m in an open area and up to 20m even in complex environments, which is stable and smooth without breakpoints.
The matching shock-absorbing bracket can reduce external vibration interference and improve recording quality. Also, the VM30 can be used with boom pole, arm stands, tripods, etc.
The equipped high-density windscreen and windmuff effectively filter various noises and ensure clean reception even when shooting outdoors.
Wireless Band 2400~ 2483.5MHz Transmitting Power +10dBm Receiving Sensitivity -86dBm Sound Delay <20ms Polar Pattern Super Cardioid Frequency Response 20Hz~20kHz Low-cut 75Hz,150Hz/ 10kHz High-frequency Boost Sensitivity -38dB ~ -18dB re 1V/Pa(12mv ~ 125mv @ 94dB SPL) ±2dB @ 1kHz S/N 75dB SPL(A-weighted,as per IEC651) Equivalent Noise 19dB SPL(A-weighted,as per IEC651) Maximum SPL 130dB SPL(@ 1% THD) Dynamic Range 111dB SPL(A-weighted,as per IEC651) Output 3.5mm TRRS/TRS Analog Output; USB-C 48kHz 24bit Digital Output Battery Transmitter:Li-polymer 3.7V 350mAh; Receiver:Li-polymer 3.7V 330mAh Battery Life Transmitter:Wireless Mode 7 Hours / Wired Mode 50 Hours / Receiver:7 Hours Net Weight Transmitter:93g; Receiver:29g
How far is the recommended recording distance of VM30?
In wired mode, the recommended distance is 2 meters. In wireless mode, the transmission distance can reach 100 meters in the open area. Don’t cover the LCD screen of the shotgun microphone (antenna position) in wireless mode.
How many devices can the VM30 output at the same time?
The VM30 microphone supports three output modes to be turned on at the same time, analog output, USB digital output, and wireless output. That is to say, the VM30 microphone can output to three devices at the same time.
How do i use this mic on my IOS devices with lightning connector?
For iOS users, please get the USB C to Lightning or 3.5mm TRRS to Lightning cable with OTG function, which is not included in our package.（It is highly recommended to use the CVM-D-MI audio output cable from COMICA.）
Can safety mode be used in wireless mode?
No, the safety mode of the VM30 microphone can only be used in wired mode and please note that it can only output mono in wireless mode.
Can the VM30 be used with a BoomX-D receiver?
Yes. The VM30 shotgun mic can be used with BoomX-D receiver.
Comica’s Groundbreaking Wireless Shotgun Microphone: The Comica VM30 features an integrated wireless module and supports both wired and wireless recording modes, providing flexibility for recording in various settings.
3.5mm Intelligent Auto-sensing Output: In wired mode, the VM30 shotgun mic can automatically switch on and off, intelligently sensing the 3.5mm output for plug and play convenience and power savings. As a wireless microphone, it can automatically pair and be applied to a wider range of shooting scenes. With a one-button switch, wired/wireless modes can be used simultaneously.
High-fidelity Sound Quality: With a 48kHz/24bit high sampling rate and super-cardioid pattern, the VM30 camera microphone accurately picks up sound sources, reduces ambient noise, and delivers clean and delicate sound.
75/150Hz Low-cut Filter Modes: The dual low-cut filter modes effectively remove unwanted low-frequency noise and rumble, while the high-frequency boost mode enhances clarity and detail in high-pitched sounds such as voices and instruments.
Digital and Analog Outputs: The VM30 wireless shotgun microphone offers USB C digital and 3.5mm analog output options. In wireless mode, the VM30’s receiver also features digital and analog outputs. You can use this microphone kit to be compatible with a variety of cameras, smartphones, and computers, providing versatility for different recording scenarios.
Long Battery Life: The shotgun camera microphone features a built-in rechargeable lithium battery that lasts up to 50 hours in wired mode and up to 7 hours in wireless mode, ensuring plenty of recording time without worrying about running out of power.
Multi-functional Wireless Microphone: The dslr microphone supports stepless gain control and safty mode, while the receiver offers 12-level gain adjustment, muting, and real-time monitoring. These functions help users adjust according to shooting needs, avoid accidents and noise, and ensure efficient and stable microphone operation.
Ideal for On-the-Go Recording: With low latency (
Customers say
Customers like the audio quality, functionality, and features of the microphone. They mention it delivers high-quality audio in both wired and wireless modes, and its super-cardioid polar pattern ensures focused sound capture. Some appreciate the build quality and value for money. Customers are also satisfied with the wireless capability.
AI-generated from the text of customer reviews
